|
|
|
|
|
| |
|
| |
 Product name
|
|
|
|
|
|
|
| |
| |
| |
|
|
| |
|
|
BE905A1 / Mobile Data Terminal
|
1. 1.0 GHz ARM Cortex A8 CPU Core
2. 512MB LPDDR/8GB eMMC
3. Support SD/SDHC Card
4. Windows CE 6.0 OS
5. 7" TFT LCD with 800x480 WVGA
6. 4-wired Resistive Touch Panel
7. On-board 3G and GPS Module
8. 1x RS232C/ 1x Host USB/ 1x Device USB/4x GPIO
9. 2x ADC/ 1x CAN Bus/ 7x User Programmable Keypads
10. Internal 2 Watt Speaker and Microphone
11.18.5Wh Li-on Battery (optional)
12. DC 11V~30V Power supply Requirement
13. Industrial Grade, Plastic Enclosure Design to meet IP54
14. Various Optional Accessories
15.Rohs ,Reach, WEEE, CE, FCC, CE, UL certification |
|
|
|
|
BETA903A / Mobile Data Terminal
|
1. 400MHz 32bit RISC architecture ARM926EJ CPU Core
2. 2GB NAND Flash/64MB DDR2 DRAM
3. WINCE 5.0 OS
4. 8 interrupt-based keypads
5. 8 x IO/ 1 x Host USB/ 1 x Device USB/ 3 x RS232
6. On-board GSM/GPRS and GPS module
7. 7" TFT 16:9 display with 800 x 480 resolution
8. 4-wire resistive touch panel interface (option)
9. DSP based audio codec via IIS-bus
10. Built-in 2W amplifier/earphone
11. Support SD/HS-MMC card
12. 9V~28V DC requirement
13. Backup charger circuit inside
14. With car mount accessory
|
|
|
|
|
BEGA220A/Display Embedded System
|
1. 400MHz 32bit RISC architecture ARM926EJ CPU Core
2. 2GB NAND Flash/64MB DDRII Memory
3. WINCE 5.0 OS
4. LCD controller supporting RGB maximum 16M color at 24bpp
5. On board 10/100Mbps high performance Ethernet with RJ45
6. 1 x Host USB /1 x Device USB
7. 1 x isolated RS485/422
8. 3 x RS232/ 1 x SPI
9. Audio Codec with dual channels amplifiers
10. 6 x Channels ADC and one 4-wired touch panel
11. Support SD/HS-MMC card
12. 12 programmable IO
13. 9V~28V DC requirement
14. Dimension(WxHxD): 195x110x25.7 mm
|
|
|
|
|
BEGV606M
|
1. High performance, Low power PIC 16-bit microprocessor
2. Built in 64KB ISP Flash memory/8KB SRAM
3. On board updateable 64KB EEPROM(128KB option)
4. 1xRS485/422/232,1xRS232
5. Corrent consumption 180mA
6. 20 x 2 character monochrome STN LCD
7. On-chip power-on reset(POR) and programmable watchdog reset
8. Comprehensive set of development tools and application notes for self programming.
9. RS485/422/232 driver, I2C EEPROM Driver,touch panel driver,utility and LCM driver are supported.
|
|
|
|
|
BEGV627M
|
1. High performance, Low power PIC 16-bit microprocessor
2. Built in 64KB ISP Flash memory/8KB SRAM
3. On board updateable 64KB EEPROM(128KB option)
4. 1xRS485/422/232,1xRS232
5. Corrent consumption 180mA
6. 128 x 64 monochrome STN LCD
7. On-chip power-on reset(POR) and programmable watchdog reset
8. Comprehensive set of development tools and application notes for self programming.
9. RS485/422/232 driver, I2C EEPROM Driver,touch panel driver,utility and LCM driver are supported.
|
|
|
|
|
BEGV629M
|
1. High performance, Low power PIC 16-bit microprocessor
2. Built in 64KB ISP Flash memory/8KB SRAM
3. On board updateable 64KB EEPROM(128KB option)
4. 1xRS485/422/232,1xRS232
5. Corrent consumption 150mA
6. 128 x 64 monochrome OLED
7. On-chip power-on reset(POR) and programmable watchdog reset
8. Comprehensive set of development tools and application notes for self programming.
9. RS485/422/232 driver, I2C EEPROM Driver,
OLED dreiver and utility are supported.
|
|
|
|
|
BEGV639M
|
1. High performance, Low power PIC 16-bit microprocessor
2. Built in 64KB ISP Flash memory/8KB SRAM
3. On board updateable 64KB EEPROM(128KB option)
4. 1xRS485/422/232,1xRS232
5. Built-in 4-wired resistive touch panel
6. Corrent consumption 160mA
7. 240 x 64 monochrome STN LCD
8. On-chip power-on reset(POR) and programmable watchdog reset
9. Comprehensive set of development tools and application notes for self programming.
10. RS485/422/232 driver, I2C EEPROM Driver,touch panel driver,utility and LCM driver are supported.
|
|
|
|
|
BEGV641A
|
1. High performance, Low power AVR 8-bit microprocessor
2. Built in 64KB Flash memory(option: 128KB)/4KB SRAM
3. On board updateable 128KB EEPROM
4. One isolated RS485/422/232
5. High speed SPI and I2C
6. Lower voltage operation to 3.3V
7. Built in 4 wired resistive touch Panel
8. 240X128 Monochrome STN LCD
9. On-chip power-on reset(POR) and programmable watchdog reset
10. Comprehensive set of development tools and application notes for self programming.
11. RS485/422/232 driver, SPI driver, I2C Driver, Touch Panel driver and utility and LCM driver are supported. |
|
|
|
|
BEGV643A
|
1. High performance, Low power AVR 8-bit microprocessor
2. Built in 64KB Flash memory(option: 128KB)/4KB SRAM
3. On board updateable 128KB EEPROM
4. One isolated RS485/422/232
5. High speed SPI and I2C
6. Lower voltage operation to 3.3V
7. Built in 4 wired resistive touch Panel
8. 320X240 Monochrome STN LCD
9. On-chip power-on reset(POR) and programmable watchdog reset
10. Comprehensive set of development tools and application notes for self programming.
11. RS485/422/232 driver, SPI driver, I2C Driver, Touch Panel driver and utility and LCM driver are supported. |
|
|
|
|
BEMA101A
|
1. Low power ARM 32-bit Cortex –M3 CPU
2. 256KB Flash and 48KB SRAM
3. On board GSM/
4. GPS Module(Option)
5. Build in Battery Charger Circuit
6. 5XIO port/ 1xAD in port/ 2XRS232 port
7. Wide temperature operation |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|